allied_telesis_awplus#
Warning
This is automatically generated. In case of any issues, please refer to the source code or, even better, open an issue on the GitHub repository. Thanks! 🤗📖
Platforms:#
Commands#
enable#
Output:
null
Help: enter enable mode
Prompt: - allied_telesis_awplus>
show lldp neighbors detail#
Output:
LLDP Detailed Neighbor Information:
Local port1.0.1:
Neighbors table last updated 1233 hrs 56 mins 19 secs ago
Chassis ID Type .................. MAC address
Chassis ID ....................... 0050.56a6.9a73
Port ID Type ..................... MAC address
Port ID .......................... 0050.56a6.9a73
TTL .............................. 3601 (secs)
Port Description ................. [not advertised]
System Name ...................... [not advertised]
System Description ............... [not advertised]
System Capabilities .............. [not advertised]
Management Addresses ............. [not advertised]
Port VLAN ID (PVID) .............. [not advertised]
Port & Protocol VLAN ............. [not advertised]
VLAN Names ....................... [not advertised]
Protocol IDs ..................... [not advertised]
MAC/PHY Auto-negotiation ......... Supported, Enabled
Advertised Capability ....... 1000BaseTFD
Operational MAU Type ........ Unknown (0)
Power Via MDI (PoE) .............. [not advertised]
Link Aggregation ................. [not advertised]
Maximum Frame Size ............... [not advertised]
LLDP-MED Device Type ............. Endpoint Class I
LLDP-MED Capabilities ............ LLDP-MED Capabilities
Network Policy ................... [not advertised]
Location Identification .......... [not advertised]
Extended Power Via MDI (PoE) ..... [not advertised]
Inventory Management:
Hardware Revision ........... [not advertised]
Firmware Revision ........... [not advertised]
Software Revision ........... [not advertised]
Serial Number ............... [not advertised]
Manufacturer Name ........... [not advertised]
Model Name .................. [not advertised]
Asset ID .................... [not advertised]
Local port1.0.23:
Neighbors table last updated 4393 hrs 26 mins 21 secs ago
Chassis ID Type .................. MAC address
Chassis ID ....................... 001a.eb96.25f4
Port ID Type ..................... Interface name
Port ID .......................... port1.0.15
TTL .............................. 120 (secs)
Port Description ................. ===== 6F-SH210-5 port1.0.23/port1.0.24 ====
System Name ...................... 6F-SH210-1
System Description ............... Allied Telesis router/switch, AW+
v5.4.5-1.3
System Capabilities - Supported .. Bridge, Router
- Enabled .... Bridge
Management Addresses ............. 192.168.254.201
Port VLAN ID (PVID) .............. 0
Port & Protocol VLAN - Supported . Yes
- Enabled ... No
- VIDs ...... 0
VLAN Names ....................... KIT-NET, ISW-NET, StorageMGT, Storage-A,
Storage-B, CL-Osaka-Common, R10-4, BASE,
A-NET2, A-NET3, O-NET, O3-NET, V-NET,
B2-NET, SS, sw-base, MH-HONSHA, COMMON,
SV-common, BKUP
Protocol IDs ..................... 9000, 0026424203000000, 0027424203000002,
0069424203000003, 888e01, aaaa0300e02b00bb,
88090101, 00540000e302, 0800, 0806, 86dd
MAC/PHY Auto-negotiation ......... Supported, Enabled
Advertised Capability ....... 1000BaseTFD, 100BaseTXFD, 100BaseTX,
10BaseTFD, 10BaseT
Operational MAU Type ........ 1000BaseTFD (30)
Power Via MDI (PoE) .............. Not Supported
Port Class .................. PSE
Pair Control Ability ........ Disabled
Power Class ................. Unknown
Link Aggregation ................. Supported, Enabled
Aggregated Port-ID .......... 4502
Maximum Frame Size ............... 1500 (Octets)
LLDP-MED Capabilities ............ [not advertised]
Network Policy ................... [not advertised]
Location Identification .......... [not advertised]
Extended Power Via MDI (PoE) ..... [not advertised]
Inventory Management:
Hardware Revision ........... [not advertised]
Firmware Revision ........... [not advertised]
Software Revision ........... [not advertised]
Serial Number ............... [not advertised]
Manufacturer Name ........... [not advertised]
Model Name .................. [not advertised]
Asset ID .................... [not advertised]
Local port1.0.24:
Neighbors table last updated 4393 hrs 26 mins 21 secs ago
Chassis ID Type .................. MAC address
Chassis ID ....................... 001a.eb96.25f4
Port ID Type ..................... Interface name
Port ID .......................... port1.0.16
TTL .............................. 120 (secs)
Port Description ................. ===== 6F-SH210-5 port1.0.23/port1.0.24 ====
System Name ...................... 6F-SH210-1
System Description ............... Allied Telesis router/switch, AW+
v5.4.5-1.3
System Capabilities - Supported .. Bridge, Router
- Enabled .... Bridge
Management Addresses ............. 192.168.254.201
Port VLAN ID (PVID) .............. 0
Port & Protocol VLAN - Supported . Yes
- Enabled ... No
- VIDs ...... 0
VLAN Names ....................... KIT-NET, ISW-NET, StorageMGT, Storage-A,
Storage-B, CL-Osaka-Common, R10-4, BASE,
A-NET2, A-NET3, O-NET, O3-NET, V-NET,
B2-NET, SS, sw-base, MH-HONSHA, COMMON,
SV-common, BKUP
Protocol IDs ..................... 9000, 0026424203000000, 0027424203000002,
0069424203000003, 888e01, aaaa0300e02b00bb,
88090101, 00540000e302, 0800, 0806, 86dd
MAC/PHY Auto-negotiation ......... Supported, Enabled
Advertised Capability ....... 1000BaseTFD, 100BaseTXFD, 100BaseTX,
10BaseTFD, 10BaseT
Operational MAU Type ........ 1000BaseTFD (30)
Power Via MDI (PoE) .............. Not Supported
Port Class .................. PSE
Pair Control Ability ........ Disabled
Power Class ................. Unknown
Link Aggregation ................. Supported, Enabled
Aggregated Port-ID .......... 4502
Maximum Frame Size ............... 1500 (Octets)
LLDP-MED Capabilities ............ [not advertised]
Network Policy ................... [not advertised]
Location Identification .......... [not advertised]
Extended Power Via MDI (PoE) ..... [not advertised]
Inventory Management:
Hardware Revision ........... [not advertised]
Firmware Revision ........... [not advertised]
Software Revision ........... [not advertised]
Serial Number ............... [not advertised]
Manufacturer Name ........... [not advertised]
Model Name .................. [not advertised]
Asset ID .................... [not advertised]
Help: execute the command "show lldp neighbors detail"
Prompt: - allied_telesis_awplus> - allied_telesis_awplus#
show arp#
Output:
IP Address MAC Address Interface Port Type
192.168.254.251 0000.cd37.06aa vlan954 sa1 dynamic
192.168.254.250 0000.cd37.06bb vlan954 sa1 dynamic
Help: execute the command "show arp"
Prompt: - allied_telesis_awplus> - allied_telesis_awplus#
show mac address-table#
Output:
VLAN port mac fwd
900 sa1 0009.0f09.0000 forward dynamic
900 sa1 0015.5d00.ab14 forward dynamic
900 sa1 0015.5d00.ab15 forward dynamic
989 port1.0.19 0050.566a.1aca forward dynamic
Help: execute the command "show mac address-table"
Prompt: - allied_telesis_awplus> - allied_telesis_awplus#
show interface switchport#
Output:
Interface name : port1.0.1
Switchport mode : trunk
Ingress filter : enable
Acceptable frame types : vlan-tagged only
Default Vlan : None
Configured Vlans : 767 793 794 811 900 964 973
989 1111 2222
Dynamic Vlans :
Interface name : port1.0.2
Switchport mode : trunk
Ingress filter : enable
Acceptable frame types : vlan-tagged only
Default Vlan : None
Configured Vlans : 767 793 794 811 900 964 973
989 1111 2222
Dynamic Vlans :
Interface name : port1.0.3
Switchport mode : trunk
Ingress filter : enable
Acceptable frame types : vlan-tagged only
Default Vlan : None
Configured Vlans : 795
Dynamic Vlans :
Interface name : port1.0.4
Switchport mode : trunk
Ingress filter : enable
Acceptable frame types : vlan-tagged only
Default Vlan : None
Configured Vlans : 793
Dynamic Vlans :
Interface name : port1.0.5
Switchport mode : trunk
Ingress filter : enable
Acceptable frame types : vlan-tagged only
Default Vlan : None
Configured Vlans : 794
Dynamic Vlans :
Interface name : port1.0.6
Switchport mode : trunk
Ingress filter : enable
Acceptable frame types : vlan-tagged only
Default Vlan : None
Configured Vlans : 989
Dynamic Vlans :
Interface name : port1.0.7
Switchport mode : access
Ingress filter : enable
Acceptable frame types : all
Default Vlan : 989
Configured Vlans : 989
Dynamic Vlans :
Interface name : port1.0.8
Switchport mode : access
Ingress filter : enable
Acceptable frame types : all
Default Vlan : 989
Configured Vlans : 989
Dynamic Vlans :
Interface name : port1.0.9
Switchport mode : access
Ingress filter : enable
Acceptable frame types : all
Default Vlan : 989
Configured Vlans : 989
Dynamic Vlans :
Interface name : port1.0.10
Switchport mode : access
Ingress filter : enable
Acceptable frame types : all
Default Vlan : 900
Configured Vlans : 900
Dynamic Vlans :
Interface name : port1.0.11
Switchport mode : trunk
Ingress filter : enable
Acceptable frame types : vlan-tagged only
Default Vlan : None
Configured Vlans : 989
Dynamic Vlans :
Interface name : port1.0.12
Switchport mode : trunk
Ingress filter : enable
Acceptable frame types : vlan-tagged only
Default Vlan : None
Configured Vlans : 795
Dynamic Vlans :
Interface name : port1.0.13
Switchport mode : trunk
Ingress filter : enable
Acceptable frame types : vlan-tagged only
Default Vlan : None
Configured Vlans : 479 767 793 794 811 900 964
973 989 1111 2222
Dynamic Vlans :
Interface name : port1.0.23
Switchport mode : trunk
Ingress filter : enable
Acceptable frame types : vlan-tagged only
Default Vlan : None
Configured Vlans : 504 508 767 793 794 811 883
900 909 910 914 915 929 931
952 954 955 964 973 989
Dynamic Vlans :
Help: execute the command "show interface switchport"
Prompt: - allied_telesis_awplus> - allied_telesis_awplus#
show system#
Output:
System Status Sat Feb 03 03:30:29 2024
Board ID Bay Board Name Rev Serial number
--------------------------------------------------------------------------------
Base 467 AT-SH210-24GT B-0 G22TG6001
--------------------------------------------------------------------------------
RAM: Total: 123860 kB Free: 47472 kB
Flash: 63.0MB Used: 20.5MB Available: 42.5MB
--------------------------------------------------------------------------------
Environment Status : Normal
Uptime : 1425 days 19:42:12
Bootloader version : 2.0.25
Current software : SH210-5.4.5-1.3.rel
Software version : 5.4.5-1.3
Build date : Fri Sep 11 00:34:15 UTC 2015
Current boot config: flash:/default.cfg (file exists)
System Name
6F-SH210-5
System Contact
System Location
Help: execute the command "show system"
Prompt: - allied_telesis_awplus> - allied_telesis_awplus#
show static-channel-group#
Output:
% Static Aggregator: sa11
% Member: sa1
port1.1.1
port1.1.2
port1.1.3
port1.1.4
% Static Aggregator: sa12
% Member: sa2
port1.1.5
port1.1.6
Help: execute the command "show static-channel-group"
Prompt: - allied_telesis_awplus> - allied_telesis_awplus#
show interface#
Output:
Interface port1.1.1
Scope: both
Link is UP, administrative state is UP
Thrash-limiting
Status Not Detected, Action learn-disable, Timeout 1(s)
Hardware is Ethernet, address is 0000.cd37.0fcf
Description: To XXXXXXXXXXXX
index 5101 metric 1 mru 1500
current duplex full, current speed 10000, current polarity mdi
configured duplex auto, configured speed auto, configured polarity auto
<UP,BROADCAST,RUNNING,MULTICAST>
SNMP link-status traps: Sending (suppressed after 20 traps in 60 sec)
Link-status trap delay: 0 sec
input packets 9455362865, bytes 11289114945786, dropped 0, multicast packets 3410881
output packets 17173058785, bytes 12752872494347, multicast packets 513043665, broadcast packets 830156481
input average rate : 30 seconds 1.05 Mbps, 5 minutes 590.97 Kbps
output average rate: 30 seconds 1.64 Mbps, 5 minutes 919.28 Kbps
input peak rate 806.73 Mbps at 2023/01/12 23:32:30
output peak rate 806.80 Mbps at 2023/01/12 23:32:30
Time since last state change: 0 days 01:14:20
Interface vlan1
Scope: both
Link is UP, administrative state is UP
Hardware is VLAN, address is 0000.cd37.0fcf
IPv4 address 192.168.1.1/24 broadcast 192.168.1.255
index 301 metric 1 mtu 1500
arp ageing timeout 300
<UP,BROADCAST,RUNNING,MULTICAST>
VRF Binding: Associated with VRF01
SNMP link-status traps: Disabled
Router Advertisement is disabled
Router Advertisement default routes are accepted
Router Advertisement prefix info is accepted
input packets 30729674, bytes 2331109561, dropped 206, multicast packets 1014964
output packets 117039344, bytes 5218779216, multicast packets 0, broadcast packets 0
Time since last state change: 134 days 01:22:08
Interface vlan2
Scope: both
Link is UP, administrative state is UP
Hardware is VLAN, address is 0000.cd37.0fcf
index 302 metric 1 mtu 1500
arp ageing timeout 300
<UP,BROADCAST,RUNNING,MULTICAST>
VRF Binding: Not bound
SNMP link-status traps: Disabled
Router Advertisement is disabled
Router Advertisement default routes are accepted
Router Advertisement prefix info is accepted
input packets 0, bytes 0, dropped 0, multicast packets 0
output packets 0, bytes 0, multicast packets 0, broadcast packets 0
Time since last state change: 134 days 01:22:08
Interface vlan3
Scope: both
Link is UP, administrative state is UP
Hardware is VLAN, address is 0000.cd37.0fcf
IPv4 address 192.168.3.1/24 broadcast 192.168.3.255
index 303 metric 1 mtu 1500
arp ageing timeout 300
<UP,BROADCAST,RUNNING,MULTICAST>
VRF Binding: Associated with VRF01
SNMP link-status traps: Disabled
Router Advertisement is disabled
Router Advertisement default routes are accepted
Router Advertisement prefix info is accepted
input packets 35361512, bytes 2570082989, dropped 0, multicast packets 360213
output packets 24669070, bytes 1441930633, multicast packets 0, broadcast packets 0
Time since last state change: 134 days 01:22:08
Interface lo
Scope: both
Link is UP, administrative state is UP
Hardware is Loopback
index 1 metric 1
<UP,LOOPBACK,RUNNING>
VRF Binding: Not bound
SNMP link-status traps: Disabled
Router Advertisement is disabled
Router Advertisement default routes are accepted
Router Advertisement prefix info is accepted
Time since last state change: 134 days 01:59:44
Interface lo1
Scope: both
Link is UP, administrative state is UP
Hardware is Loopback
index 5 metric 1
<UP,RUNNING,NOARP>
VRF Binding: Associated with VRF01
SNMP link-status traps: Disabled
Router Advertisement is disabled
Router Advertisement default routes are accepted
Router Advertisement prefix info is accepted
Time since last state change: 134 days 01:59:44
Interface lo2
Scope: both
Link is UP, administrative state is UP
Hardware is Loopback
index 6 metric 1
<UP,RUNNING,NOARP>
VRF Binding: Associated with VRF02
SNMP link-status traps: Disabled
Router Advertisement is disabled
Router Advertisement default routes are accepted
Router Advertisement prefix info is accepted
Time since last state change: 134 days 01:59:44
Interface lo3
Scope: both
Link is UP, administrative state is UP
Hardware is Loopback
index 7 metric 1
<UP,RUNNING,NOARP>
VRF Binding: Associated with VRF03
SNMP link-status traps: Disabled
Router Advertisement is disabled
Router Advertisement default routes are accepted
Router Advertisement prefix info is accepted
Time since last state change: 134 days 01:59:44
Interface lo4
Scope: both
Link is UP, administrative state is UP
Hardware is Loopback
index 8 metric 1
<UP,RUNNING,NOARP>
VRF Binding: Associated with VRF04
SNMP link-status traps: Disabled
Router Advertisement is disabled
Router Advertisement default routes are accepted
Router Advertisement prefix info is accepted
Time since last state change: 134 days 01:59:44
Help: execute the command "show interface"
Prompt: - allied_telesis_awplus> - allied_telesis_awplus#
show vlan all#
Output:
VLAN ID Name Type State Member ports
(u)-Untagged, (t)-Tagged
======= ================ ======= ======= ====================================
1 default STATIC ACTIVE
479 VLAN0479 STATIC ACTIVE port1.0.13(t) port1.0.14(t)
504 VLAN0504 STATIC ACTIVE sa1(t) port1.0.23(t) port1.0.24(t)
508 VLAN0508 STATIC ACTIVE sa1(t) port1.0.25(t) port1.0.26(t)
511 DMZ-G STATIC ACTIVE
767 VLAN0767 STATIC ACTIVE sa1(t) port1.0.1(t) port1.0.2(t)
port1.0.13(t) port1.0.14(t)
port1.0.21(t) port1.0.22(t)
port1.0.23(t) port1.0.24(t)
793 VLAN0793 STATIC ACTIVE sa1(t) port1.0.1(t) port1.0.2(t)
port1.0.4(t) port1.0.13(t)
port1.0.14(t) port1.0.17(t)
port1.0.24(t) port1.0.25(t)
port1.0.26(t) port1.0.28(t)
795 VLAN0795 STATIC ACTIVE port1.0.3(t) port1.0.12(t)
port1.0.29(t)
Help: execute the command "show vlan all"
Prompt: - allied_telesis_awplus> - allied_telesis_awplus#
show ip route#
Output:
Codes: C - connected, S - static, R - RIP, B - BGP
O - OSPF, D - DHCP, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
* - candidate default
Gateway of last resort is 192.168.254.251 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 192.168.254.251, vlan954
C 10.255.255.0/24 is directly connected, vlan795
C 192.168.254.0/24 is directly connected, vlan954
O 10.0.0.0/8 [110/20] via 192.168.254.251, vlan954
O E1 172.16.23.0/24 [110/30] via 192.168.254.251, vlan954
[VRF: DMZ]
Gateway of last resort is 20.0.0.254 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 20.0.0.254, vlan511
C 20.0.0.0/24 is directly connected, vlan511
[VRF: AAA]
Gateway of last resort is 2.0.0.254 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 2.0.0.254, vlan51
C 2.0.0.0/24 is directly connected, vlan51
Help: execute the command "show ip route"
Prompt: - allied_telesis_awplus> - allied_telesis_awplus#
show etherchannel summary#
Output:
Aggregator po7 (IfIndex: 4607)
Admin Key: 0007 - Oper Key 0007
Link: port1.0.7 (IfIndex: 5007) synchronized
Link: port1.0.8 (IfIndex: 5008) synchronized
Aggregator po8 (IfIndex: 4607)
Admin Key: 0008 - Oper Key 0008
Link: port1.0.9 (IfIndex: 5009) synchronized
Link: port1.0.10 (IfIndex: 5010) synchronized
Help: execute the command "show etherchannel summary"
Prompt: - allied_telesis_awplus> - allied_telesis_awplus#
terminal length 0#
Output: None
Help: Execute the command terminal length 0. This automatically generated. Feel free to change it!
Prompt: - allied_telesis_awplus> - allied_telesis_awplus#