hp_procurve#
Warning
This is automatically generated. In case of any issues, please refer to the source code or, even better, open an issue on the GitHub repository. Thanks! 🤗📖
Platforms:#
Commands#
enable#
Output:
null
Help: enter enable mode
Prompt: - hp_procurve>
show ip#
Output:
Internet (IP) Service
Default Gateway : 10.11.11.254
Default TTL : 64
Arp Age : 20
Domain Suffix :
DNS server :
VLAN | IP Config IP Address Subnet Mask
-------------------- + ---------- --------------- ---------------
DEFAULT_VLAN | Disabled
MGMTVLAN | Manual 10.11.11.200 255.255.255.0
Help: execute the command "show ip"
Prompt: - hp_procurve> - hp_procurve#
no page#
Output: None
Help: Disable pagination
Prompt: - hp_procurve> - hp_procurve#
logout#
Output:
True
Help: not implemented the exit
Prompt: - hp_procurve> - hp_procurve#
show lldp info remote-device detail#
Output:
LLDP Remote Device Information Detail
Local Port : 1
ChassisType : mac-address
ChassisId : 3821c7-c1cd00
PortType : local
PortId : 1
SysName : 65432p-swi006-abcd-srvroom-4asd
System Descr : Aruba JL357A 2540-48G-PoE+-4SFP+ Switch, revision YC.16.0...
PortDescr : 1
Pvid : 0
System Capabilities Supported : bridge, router
System Capabilities Enabled : bridge
Remote Management Address
Type : ipv4
Address : 192.168.130.100
Poe Plus Information Detail
Poe Device Type : Type2 PSE
Power Source : Unknown
Power Priority : Unknown
PD Requested Power Value : 0.0 Watts
PSE Allocated Power Value : 0.0 Watts
------------------------------------------------------------------------------
Local Port : 3
ChassisType : mac-address
ChassisId : 3ce1a1-2218f0
PortType : mac-address
PortId : 3c e1 a1 22 18 f0
SysName :
System Descr :
PortDescr :
Pvid :
System Capabilities Supported :
System Capabilities Enabled :
Remote Management Address
MED Information Detail
EndpointClass :Class1
------------------------------------------------------------------------------
Local Port : 7
ChassisType : mac-address
ChassisId : bcf310-1f8b40
PortType : interface-name
PortId : mgt0
SysName : AH-cust-AP21
System Descr :
PortDescr :
Pvid :
System Capabilities Supported : bridge, wlan-access-point
System Capabilities Enabled : bridge, wlan-access-point
Remote Management Address
Type : ipv4
Address : 192.168.100.55
MED Information Detail
EndpointClass :Class1
Poe Device Type :PD
Power Requested :17.5 W
Power Source :From PSE
Power Priority :Critical
Poe Plus Information Detail
Poe Device Type : Type2 PD
Power Source : Unknown
Power Priority : Critical
PD Requested Power Value : 17.5 Watts
PSE Allocated Power Value : 17.5 Watts
------------------------------------------------------------------------------
Local Port : 25
ChassisType : mac-address
ChassisId : d8cb8a-6d303c
PortType : mac-address
PortId : d8 cb 8a 6d 30 3c
SysName :
System Descr :
PortDescr :
Pvid :
System Capabilities Supported :
System Capabilities Enabled :
Remote Management Address
MED Information Detail
EndpointClass :Class1
------------------------------------------------------------------------------
Local Port : 29
ChassisType : mac-address
ChassisId : 484d7e-e66c42
PortType : mac-address
PortId : 48 4d 7e e6 6c 42
SysName :
System Descr :
PortDescr :
Pvid :
System Capabilities Supported :
System Capabilities Enabled :
Remote Management Address
MED Information Detail
EndpointClass :Class1
------------------------------------------------------------------------------
Local Port : 36
ChassisType : mac-address
ChassisId : 603197-7aa548
PortType : local
PortId : 1
SysName : NAP203
System Descr : ZLD 6.00(###.8)B1 (cannon)
PortDescr : UPLINK
Pvid :
System Capabilities Supported : bridge, wlan-access-point, router
System Capabilities Enabled : bridge, wlan-access-point, router
Remote Management Address
Type : ipv4
Address : 192.168.100.50
Poe Plus Information Detail
Poe Device Type : Type2 PD
Power Source : Unknown
Power Priority : High
PD Requested Power Value : 16.0 Watts
PSE Allocated Power Value : 16.0 Watts
------------------------------------------------------------------------------
Local Port : 37
ChassisType : mac-address
ChassisId : b00cd1-359a98
PortType : mac-address
PortId : b0 0c d1 35 9a 98
SysName :
System Descr :
PortDescr :
Pvid :
System Capabilities Supported :
System Capabilities Enabled :
Remote Management Address
MED Information Detail
EndpointClass :Class1
------------------------------------------------------------------------------
Local Port : 42
ChassisType : mac-address
ChassisId : d8cb8a-894644
PortType : mac-address
PortId : d8 cb 8a 89 46 44
SysName :
System Descr :
PortDescr :
Pvid :
System Capabilities Supported :
System Capabilities Enabled :
Remote Management Address
MED Information Detail
EndpointClass :Class1
Help: execute the command "show lldp info remote-device detail"
Prompt: - hp_procurve> - hp_procurve#
show vlans#
Output:
Status and Counters - VLAN Information
Maximum VLANs to support : 256
Primary VLAN : DEFAULT_VLAN
Management VLAN :
VLAN ID Name | Status Voice Jumbo
------- -------------------------------- + ---------- ----- -----
1 DEFAULT_VLAN | Port-based No No
10 Router Vlan | Port-based No No
50 Voice | Port-based Yes No
Help: execute the command "show vlans"
Prompt: - hp_procurve> - hp_procurve#
show interfaces#
Output:
Status and Counters - Port Counters
Flow
Port Total Bytes Total Frames Errors Rx Drops Tx Ctrl
---------- -------------- -------------- ------------ ------------ ----
1 200,205 1861 0 0 off
2 0 0 0 0 off
3 0 0 0 0 off
4 0 0 0 0 off
5 0 0 0 0 off
6 0 0 0 0 off
7 0 0 0 0 off
8 0 0 0 0 off
9 0 0 0 0 off
10 0 0 0 0 off
11 0 0 0 0 off
12 0 0 0 0 off
13 0 0 0 0 off
14 0 0 0 0 off
15 0 0 0 0 off
16 0 0 0 0 off
17 0 0 0 0 off
18 0 0 0 0 off
19 0 0 0 0 off
20 0 0 0 0 off
21 0 0 0 0 off
22 0 0 0 0 off
23 0 0 0 0 off
24 0 0 0 0 off
25 0 0 0 0 off
26 0 0 0 0 off
27 0 0 0 0 off
28 0 0 0 0 off
29 0 0 0 0 off
30 0 0 0 0 off
31 0 0 0 0 off
32 0 0 0 0 off
33 0 0 0 0 off
34 0 0 0 0 off
35 0 0 0 0 off
36 0 0 0 0 off
37 0 0 0 0 off
38 0 0 0 0 off
39 0 0 0 0 off
40 0 0 0 0 off
41 0 0 0 0 off
42 0 0 0 0 off
43 0 0 0 0 off
44 0 0 0 0 off
45 0 0 0 0 off
46 0 0 0 0 off
47 0 0 0 0 off
48 0 0 0 0 off
49 0 0 0 0 off
50 0 0 0 0 off
51 0 0 0 0 off
52 0 0 0 0 off
Help: execute the command "show interfaces"
Prompt: - hp_procurve> - hp_procurve#
show port-security#
Output:
Port Security
Port Learn Mode | Action Eavesdrop Prevention
----- ------------------ + ------------------------ --------------------
1 Continuous | None Enabled
2 Continuous | None Enabled
3 Continuous | None Enabled
4 Continuous | None Enabled
5 Continuous | None Enabled
6 Continuous | None Enabled
7 Continuous | None Enabled
8 Continuous | None Enabled
9 Continuous | None Enabled
10 Static | Send Alarm, Disable Port Enabled
11 Configured | Send Alarm Enabled
12 Port-Access | None Enabled
13 Limited-Continuous | Send Alarm Enabled
14 Continuous | None Enabled
15 Continuous | None Enabled
16 Continuous | None Enabled
17 Continuous | None Enabled
18 Continuous | None Enabled
19 Continuous | None Enabled
20 Continuous | None Enabled
21 Continuous | None Enabled
22 Continuous | None Enabled
23 Continuous | None Enabled
24 Continuous | None Enabled
25 Continuous | None Enabled
26 Continuous | None Enabled
27 Continuous | None Enabled
28 Continuous | None Enabled
29 Continuous | None Enabled
30 Continuous | None Enabled
31 Continuous | None Enabled
32 Continuous | None Enabled
33 Continuous | None Enabled
34 Continuous | None Enabled
35 Continuous | None Enabled
36 Continuous | None Enabled
37 Continuous | None Enabled
38 Continuous | None Enabled
39 Continuous | None Enabled
40 Continuous | None Enabled
41 Continuous | None Enabled
42 Continuous | None Enabled
43 Continuous | None Enabled
44 Continuous | None Enabled
45 Continuous | None Enabled
46 Continuous | None Enabled
47 Continuous | None Enabled
48 Continuous | None Enabled
49 Continuous | None Enabled
50 Continuous | None Enabled
51 Continuous | None Enabled
52 Continuous | None Enabled
Help: execute the command "show port-security"
Prompt: - hp_procurve> - hp_procurve#
show lldp info remote-device#
Output:
LLDP Remote Devices Information
LocalPort | ChassisId PortId PortDescr SysName
--------- + ------------------ ------------------ --------- ------------------
1 | 3821c7-c1cd00 1 1 65432p-swi006-g...
3 | 3ce1a1-2218f0 3c e1 a1 22 18 f0
7 | bcf310-1f8b40 mgt0 AH-cust-AP21
25 | d8cb8a-6d303c d8 cb 8a 6d 30 3c
29 | 484d7e-e66c42 48 4d 7e e6 6c 42
36 | 603197-7aa548 1 UPLINK NAP203
37 | b00cd1-359a98 b0 0c d1 35 9a 98
42 | d8cb8a-894644 d8 cb 8a 89 46 44
Help: execute the command "show lldp info remote-device"
Prompt: - hp_procurve> - hp_procurve#
show arp#
Output:
IP ARP table
IP Address MAC Address Type Port
--------------- ----------------- ------- ----
10.11.12.11 0015b2-a45078 dynamic
Help: execute the command "show arp"
Prompt: - hp_procurve> - hp_procurve#
show trunks#
Output:
Load Balancing Method: L3-based (default)
Port | Name Type | Group Type
------ + -------------------------------- ---------- + ----- --------
49 | Uplink 65432p-swi001 1000LX | Trk2 LACP
50 | Uplink 65432p-swi001 1000LX | Trk2 LACP
Help: execute the command "show trunks"
Prompt: - hp_procurve> - hp_procurve#
show interfaces brief#
Output:
Status and Counters - Port Status
| Intrusion MDI Flow Bcast
Port Type | Alert Enabled Status Mode Mode Ctrl Limit
------------ ---------- + --------- ------- ------ ---------- ---- ---- -----
1 100/1000T | No Yes Down 1000FDx Auto off 0
2 100/1000T | No Yes Down 1000FDx Auto off 0
3 100/1000T | Yes Yes Down 1000FDx Auto off 0
4 100/1000T | No Yes Down 1000FDx Auto off 0
5 100/1000T | No No Down 1000FDx Auto off 0
6 100/1000T | No Yes Down 1000FDx Auto on 0
7 100/1000T | No Yes Down 1000FDx Auto off 0
8 100/1000T | No Yes Down 1000FDx Auto off 0
9 100/1000T | No Yes Down 1000FDx Auto off 0
10 100/1000T | No Yes Down 1000FDx Auto on 50
11 100/1000T | No Yes Down 1000FDx Auto off 0
12 100/1000T | No Yes Down 1000FDx Auto off 0
13 100/1000T | No Yes Down 1000FDx Auto off 0
14 100/1000T | No Yes Down 1000FDx Auto off 0
15 100/1000T | No Yes Down 1000FDx Auto off 0
16 100/1000T | No Yes Down 1000FDx Auto off 0
17 100/1000T | No Yes Down 1000FDx Auto off 0
18 100/1000T | No Yes Down 1000FDx Auto off 0
19 100/1000T | No Yes Down 1000FDx Auto off 0
20 100/1000T | No Yes Down 1000FDx Auto off 0
21 100/1000T | No Yes Down 1000FDx Auto off 0
22 100/1000T | No Yes Down 1000FDx Auto off 0
23 100/1000T | No Yes Down 1000FDx Auto off 0
24 100/1000T | No Yes Up 100FDx MDI off 0
Help: execute the command "show interfaces brief"
Prompt: - hp_procurve> - hp_procurve#
show tech buffers#
Output:
CRASHLogfileshow
Active Management Module 2 Crash Log
...Crash Log File Header..........................
Product: HP J9091A
Name: HP Switch E8212zl
Date: Apr 20 2012 12:34:21
Build: 13
Version: K.15.06.0017
Directory: /ws/swbuildm/ec_rel_eureka_qaoff/code/b
CPU: PPC85XX
crash rec index = 1
boot type = Warm Boot
willBootType = UNKNOWN BOOT
..................................................
CrashRecordPointer (ff419a8) for Crash Record Index 1
----- Crash Record: 1 at 0xff419a8 -----
crash id = 0x7f0c3993
crash info = 0xbaabface
Mgmt Module 2 went down in Active Mode
timestamp: 03/08/16 00:04:11
Crash msg: Operator warm reload.
-----
Standby Management Module 1 Crash Log
Crash Log Uninitialized
CRASHData
Slot 1
CRASHLogfileshow
slot a:
-------
...Crash Log File Header..........................
Product: Procurve CA
Name: Procurve Switch card id:68
Date: Apr 20 2012 12:18:16
Build: 288
Version: K.15.06.0017
Directory: /ws/swbuildm/ec_rel_eureka_qaoff/code/b
CPU: arm11
crash rec index = 0
boot type = POWER ON
willBootType = UNKNOWN BOOT
..................................................
No Saved Crash Information
CRASHData
slot a:
-------
MSGCOUNTERSshow
slot a:
-------
txSeq = 64295 rxSeq = 42342
rxAcks = 1209122 txAcks = 2151500
retx = 0 rxOutOfSeq = 0
rtx_pktcnt = 0 rxSeqQcnt = 0
Max pktcnt = 31 Max Qcnt = 0
Bad CRCs = 0 dupSeq = 3
MSGpoolStatsShow
slot a:
-------
total free allocated min-free missed corrupt
----- ----- --------- -------- ------ -------
MSG_BUF 4400 4168 232 4010 0 0
Checking buffer pool structures... PASSED
Allocation statistics for MSG buffer pool:
Current system time: 01/16/90 15:16:02
OwnerName OwnerID #Owned Oldest
----------- -------- ------ -----------------
(null) 1b215600 3 01/01/90 00:00:00
muiCore1 1b1ed400 2 01/01/90 00:00:04
mSess11 1b1eda40 1 01/01/90 00:00:03
mSesInp11 1b1ea880 1 01/01/90 00:00:04
mChassAgnt 1b1f1500 8 01/01/90 00:00:04
mInstUpCtl 1b215740 2 01/16/90 15:14:59
mAsicUpd 1b1e78c0 1 01/16/90 15:16:01
mAdMUpCtrl 1b1e7e00 3 01/01/90 00:00:05
mHttpCtUp 1b1dfc00 1 01/16/90 15:16:01
mIpAdMUpCt 1b1e4c80 3 01/01/90 00:00:05
mPmSlvCtrl 1b1db500 3 01/01/90 00:00:05
mPoeMgrCtl 1b1f7e80 2 01/01/90 00:00:06
tagentConsole 1b1f7900 1 01/16/90 15:16:01
muiAgent 1b1f7640 1 01/16/90 15:16:01
INTERRUPT 0 199 01/16/90 15:15:13
Note: (null) indicates buffer allocated at init time (not used since).
Slot 2
CRASHLogfileshow
slot b:
-------
...Crash Log File Header..........................
Product: Procurve CA
Name: Procurve Switch card id:124
Date: Apr 20 2012 12:18:16
Build: 288
Version: K.15.06.0017
Directory: /ws/swbuildm/ec_rel_eureka_qaoff/code/b
CPU: arm11
crash rec index = 0
boot type = POWER ON
willBootType = UNKNOWN BOOT
..................................................
No Saved Crash Information
CRASHData
slot b:
-------
MSGCOUNTERSshow
slot b:
-------
txSeq = 12101 rxSeq = 44667
rxAcks = 1237277 txAcks = 2131969
retx = 0 rxOutOfSeq = 0
rtx_pktcnt = 0 rxSeqQcnt = 0
Max pktcnt = 31 Max Qcnt = 0
Bad CRCs = 0 dupSeq = 1
MSGpoolStatsShow
slot b:
-------
total free allocated min-free missed corrupt
----- ----- --------- -------- ------ -------
MSG_BUF 4400 4168 232 4062 0 0
Checking buffer pool structures... PASSED
Allocation statistics for MSG buffer pool:
Current system time: 01/16/90 15:16:00
OwnerName OwnerID #Owned Oldest
----------- -------- ------ -----------------
(null) 1b215600 3 01/01/90 00:00:00
muiCore2 1b1f1bc0 2 01/01/90 00:00:04
mSess21 1b1ed000 1 01/01/90 00:00:04
mSesInp21 1b215740 1 01/01/90 00:00:04
mChassAgnt 1b1f1500 8 01/01/90 00:00:07
mAsicUpd 1b1e8d40 1 01/16/90 15:15:59
mAdMUpCtrl 1b1e5280 3 01/01/90 00:00:08
mHttpCtUp 1b1dc080 1 01/16/90 15:15:59
mIpAdMUpCt 1b1e1100 3 01/01/90 00:00:08
mPmSlvCtrl 1b1dc980 3 01/01/90 00:00:08
mInstUpCtl 1b1eaf40 2 01/16/90 15:14:59
mPoeMgrCtl 1b1f7f00 2 01/01/90 00:00:09
tagentConsole 1b1f7980 1 01/16/90 15:15:59
muiAgent 1b1f76c0 1 01/16/90 15:15:59
INTERRUPT 0 199 01/16/90 15:15:06
Note: (null) indicates buffer allocated at init time (not used since).
Help: execute the command "show tech buffers"
Prompt: - hp_procurve> - hp_procurve#
show system#
Output:
Status and Counters - General System Information
System Name : HP_Procurve-01
System Contact : John Smith
System Location : Downtown DC2
MAC Age Time (sec) : 300
Time Zone : -480
Daylight Time Rule : Continental-US-and-Canada
Software revision : K.15.06.0017 Base MAC Addr : 7446a0-41a56f
ROM Version : K.15.29 Serial Number : AB12CDE3FG
Allow V1 Modules : Yes
Up Time : 15 days Memory - Total : 128,380,928
CPU Util (%) : 22 Free : 61,999,280
IP Mgmt - Pkts Rx : 39,808,402 Packet - Total : 6750
Pkts Tx : 4,524,902 Buffers Free : 5086
Lowest : 3416
Missed : 0
Help: execute the command "show system"
Prompt: - hp_procurve> - hp_procurve#
show cdp neighbors detail#
Output:
CDP neighbors information
Port : 1
Device ID : AP01-Site
Address Type : IP
Address : 10.11.11.16
Platform : 5.9.1.5-001RAP-6521-60020-WR
Capability : Router
Device Port : ge1
Version : 5.9.1.5-001RAP-6521-60020-WR
------------------------------------------------------------------------------
Port : 1
Device ID : 5c 0e 8b 11 11 11
Address Type : IP
Address : 10.11.11.16
Platform : AP-6521-60020-WR, Version 5.9.1.5-001R
Capability : Router
Device Port : ge1
Version : AP-6521-60020-WR, Version 5.9.1.5-001R
------------------------------------------------------------------------------
Port : 2
Device ID : 5c 0e 8b 12 22 22
Address Type : IP
Address : Unsupported format
Platform : AP-6521-60020-WR, Version 5.9.1.5-001R
Capability : Router
Device Port : ge1
Version : AP-6521-60020-WR, Version 5.9.1.5-001R
------------------------------------------------------------------------------
Port : 2
Device ID : AP02-Site
Address Type : IP
Address : 10.11.11.17
Platform : 5.9.1.5-001RAP-6521-60020-WR
Capability : Router
Device Port : ge1
Version : 5.9.1.5-001RAP-6521-60020-WR
Help: execute the command "show cdp neighbors detail"
Prompt: - hp_procurve> - hp_procurve#
show mac-address#
Output:
Status and Counters - Port Address Table
MAC Address Port
------------- -----
00000d-600000 10
000424-731040 10
0010f3-841dea 10
5c0e8b-97d9db 3
Help: execute the command "show mac-address"
Prompt: - hp_procurve> - hp_procurve#
show ip route#
Output:
IP Route Entries
Destination Gateway VLAN Type Sub-Type Metric Dist.
------------------ --------------- ---- --------- ---------- ---------- -----
0.0.0.0/0 10.11.11.254 1111 static 250 1
10.11.11.0/24 mgmt 1111 connected 1 0
127.0.0.0/8 reject static 0 0
127.0.0.1/32 connected 1 0
Help: execute the command "show ip route"
Prompt: - hp_procurve> - hp_procurve#
terminal width 511#
Output: None
Help: Execute the command terminal width 511. This automatically generated. Feel free to change it!
Prompt: - hp_procurve> - hp_procurve#
screen-length 0 temporary#
Output: None
Help: Execute the command screen-length 0 temporary. This automatically generated. Feel free to change it!
Prompt: - hp_procurve> - hp_procurve#
terminal datadump#
Output: None
Help: Execute the command terminal datadump. This automatically generated. Feel free to change it!
Prompt: - hp_procurve> - hp_procurve#
terminal length 0#
Output: None
Help: Execute the command terminal length 0. This automatically generated. Feel free to change it!
Prompt: - hp_procurve> - hp_procurve#
disable cli prompting#
Output: None
Help: Execute the command disable cli prompting. This automatically generated. Feel free to change it!
Prompt: - hp_procurve> - hp_procurve#
disable clipaging#
Output: None
Help: Execute the command disable clipaging. This automatically generated. Feel free to change it!
Prompt: - hp_procurve> - hp_procurve#
screen-length disable#
Output: None
Help: Execute the command screen-length disable. This automatically generated. Feel free to change it!
Prompt: - hp_procurve> - hp_procurve#